Waste Paper Disposal System

THE SYSTEMWhat it does

The TSMAC waste paper disposal system takes the scrap coming off your production line, separates the paper from dust-laden air, bales the paper for recycling, filters the air, and compacts the collected dust into solid blocks. The result: recovered raw material, clean air that meets emission standards (below 50mg/Sm³), and a shop floor without drifting paper dust.

Meets air quality regulations — dust emissions kept below 50mg/Sm³
Cleaner working environment — captures airborne dust at the source, indoors and out
Compact footprint — about a quarter the size of conventional cyclone equipment, with low overall height
Easier housekeeping — floor scrap is vacuumed through a cleaning port straight back into the baler
Automatic dust handling — a briquetting press under the bag filter compacts and discharges collected dust

How the line works

① Separator
splits paper from dusty air→
② TSM Baler
compresses and ties→
③ Bag Filter
cleans the air→
④ Briquetting Press
compacts the dust→
⑤ Blower
discharges clean air

TSM BALERWaste Paper Baler

A horizontal hydraulic baler that continuously compresses corrugated scrap and ties each bale automatically with steel wire — ready for transport and stacking.

Cast-steel pusher head and heavy-duty main frame for long service life

Fully automatic cycle with self-diagnostics for stable operation

Air-cooled hydraulic system

Touch-screen PLC control — simple to operate, automatic modes included

Short cycle times for higher throughput

Safety interlocks and emergency stop protect the operator

Model / Spec	TSM_Baler_50	TSM_Baler_75
Bale size (W×H×L)	760 × 1100 × L	1050 × 1100 × L
Oil pump motor	50HP (37kW)	75HP (55kW)
Wire tying	4 wires	5 wires
Press force (at 200kg/cm²)	76 t	98 t
Press force (max 250kg/cm²)	95 t	143 t
Throughput (per 10 h)	50 t	100 t
Oil capacity	800 L	1,600 L
Hydraulic cylinder	Ø 220	Ø 270
Machine weight	11 t	20 t
Machine size (W×L×H)	3900 × 7750 × 2050	4400 × 8600 × 2150
Hopper opening (W×L)	760 × 1100	1050 × 1600

Model / Spec

TSM_Baler_50

TSM_Baler_75

Bale size (W×H×L)

760 × 1100 × L

1050 × 1100 × L

Oil pump motor

50HP (37kW)

75HP (55kW)

Wire tying

4 wires

5 wires

Press force (at 200kg/cm²)

76 t

98 t

Press force (max 250kg/cm²)

95 t

143 t

Throughput (per 10 h)

50 t

100 t

Oil capacity

800 L

1,600 L

Hydraulic cylinder

Ø 220

Ø 270

Machine weight

11 t

20 t

Machine size (W×L×H)

3900 × 7750 × 2050

4400 × 8600 × 2150

Hopper opening (W×L)

760 × 1100

1050 × 1600

SEPARATORSeparator

A rotary separator that splits incoming scrap into two streams: the paper drops down by gravity into the baler, while the dust-laden air is drawn on to the bag filter.

Sealed rotary vanes block airflow between top and bottom, so dust stays contained as the paper falls

Low-height, compact build — fits indoors

Runs steadily through long continuous shifts

Low noise and vibration

Simple construction — quick to inspect and service

Model / Spec	TSM_Separator_10	TSM_Separator_15	TSM_Separator_18
Size (W×L×H)	2200 × 1400 × 1500	3700 × 2050 × 2160	4000 × 2200 × 2430
Air volume (m³/min)	600	800	1,400
Max. scrap length (mm)	1,600	2,000	2,400
Motor (kW)	1.5	2.2	2.2

Model / Spec

TSM_Separator_10

TSM_Separator_15

TSM_Separator_18

Size (W×L×H)

2200 × 1400 × 1500

3700 × 2050 × 2160

4000 × 2200 × 2430

Air volume (m³/min)

600

800

1,400